About CalBench >> Modules >> Pressure Modules

CalBench Pressure Modules

7059 Regulated Vacuum & Pressure Calibrator

    • Pneumatic with vacuum plus 0.2, 2, 5, or 10bar versions
    • Best accuracy 0.04% of FS with 4.5 digit resolution
    • Regulated with input pressure via compressor or gas
    • Additional measure port for use with TE pumps
    • 5 quick select pressure units on front panel
    • EasyCal software compatible - readback via PC & 7051
    View Data Sheet

7062 Regulated Pneumatic Pressure Calibrator

  • Vacuum, 0.2, 2, 5, 10, or 20bar versions¬†
  • Best accuracy 0.04% of FS with 4.5 digit resolution
  • Regulated with input pressure via compressor or gas
  • Additional measure port for use with TE pumps
  • 5 quick select pressure units on front panel
  • EasyCal software compatible - readback via PC & 7051
View Data Sheet

7064 Pneumatic High Pressure Calibrator

  • 35, 70, 100, and 200bar versions
  • Best accuracy 0.04% of FS with 4.5 digit resolution
  • Regulated with input pressure via compressor or gas
  • Dual function port for output and measurement
  • 5 quick select pressure units on front panel
  • EasyCal software compatible - readback via PC & 7051
View Data Sheet

7032 Semi-Automatic Pressure Calibrator

  • 2, 5, or 10bar versions available
  • Best accuracy 0.04% of FS with 4.5 digit resolution
  • Pneumatic with 4 internal regulators
  • 5 set point calibration of transmitters & transducers
  • 5 quick select pressure units on front panel
  • EasyCal for control and readback via PC & 7051
View Data Sheet

7066 Differential Pressure Calibrator

  • 0.2, 2, 5, or 10bar versions
  • Best accuracy 0.04% of FS with 4.5 digit resolution
  • Pneumatic with input via benchtop pumps
  • Calibrate differential transmitters, gauges & more
  • 5 quick select pressure units on front panel
  • EasyCal software compatible - readback via PC & 7051
View Data Sheet

7038 Multifunction Pressure Indicator

  • Vacuum to 600bar versions available
  • Best accuracy 0.04% of FS with 4.5 digit resolution
  • Pneumatic or hydraulic input connection
  • Ideal for use with 7194 and 7195 benchtop pumps
  • 9 selectable engineering units plus loop measure
  • EasyCal software compatible - readback via PC & 7051
View Data Sheet

7065 Pressure Indicator

  • Vacuum to 600bar versions available
  • Best accuracy 0.04% of FS with 4.5 digit resolution
  • Pneumatic or hydraulic input connection
  • Ideal for use with 7194 and 7195 benchtop pumps
  • 5 quick select pressure units on front panel
  • EasyCal software compatible - readback via PC & 7051
View Data Sheet

7084 Pneumatic Pressure Controller

  • 5, 10, 20, 35, 70, 100, and 200bar versions
  • Pneumatic self-relieving regulator
  • Input pressure via rear of bench, front panel output
  • 63mm anti-shock analogue gauge
  • Needle isolation valve
  • EasyCal software for readback via PC or 7051
View Data Sheet